Off-canvas Nav

Spring Arm Setup

Warning

Never tow with loose socket bolts.  Tighten socket bolts to a minimum of 60 ft-lbs torque before each towing session.

Notice

Do not pound directly on the sockets to move them.  Pounding may cause the sockets to crack or break.  Use only the lever force of the spring arm to move tight sockets.  Loosen the socket bolt if required.  Re-tighten them once the socket has been moved.

Insert spring arms into the sockets in the hitch head.  Insert the socket pin through the hole in the socket and spring arm, and secure it with the socket pin clip.  You may need to use the spring arm as a lever to spread the sockets open.  This is to allow the spring arms to be lifted and placed onto the L-bracket.