Frequently Asked Questions
If you don't see the answer to your question here, please contact us.
Is Equal-i-zer® hitch easy to use?
Everything about the Equal-i-zer® is designed to make trailer towing easier for the customer, so that driving stays a pleasure. Intricate moves, and turns can be made with more control. And the Equal-i-zer®'s unique design allows the 4-Point Sway Control™ system to work with most surge brakes.
How does the Equal-i-zer® hitch hook-up?
With the Equal-i-zer®, the hitching process is very easy. Our unique trailer brackets eliminate the need to work with chains normally associated with weight distribution. In a nutshell there are three steps to hitch up:
- Couple the trailer onto the hitch ball.
- Use the tongue jack or the included snap-up lever to place arms onto the sway control brackets
- Insert retaining pins.
From the first time you back-up to couple it, you'll see how quick and simple to use the Equal-i-zer® hitch is. It installs on any standard two-inch receiver hitch. Then it can be coupled at any angle. Getting on the road with 4-Point Sway Control™ doesn't get much easier.
How does Equal-i-zer® hitch reduce trailer sway?
The Equal-i-zer® hitch reduces trailer sway through the 4-Point Sway Control™ friction system built directly into the hitch. When towing with an Equal-i-zer® brand hitch, towing hazards such as cross winds, passing trucks, and quick lane changes can be handled better. Only the Equal-i-zer® hitch has the power of 4-Point Sway Control™.
How long does it take to install an Equal-i-zer® hitch?
The initial installation of the Equal-i-zer® is easy. It can be done by the dealer or the trailer owner in less than an hour. The hitch is designed to bolt on, so drilling is not required. The Equal-i-zer® comes completely ready to use with no hidden costs for extra accessories, special tools, or "add-ons". After the installation the Equal-i-zer® hitches and unhitches quickly on any conventional two-inch receiver hitch.